Due to site maintenance, Forum interaction has been disabled until August 13. For support, please search existing forum posts or check the support page.
The big Phone Mounting topic
I'm a Quad Lock user myself and on the blog I've written an article on the Quad Lock Moto Mount Kit and the Motorcycle Wireless Charging Head, and an article on the Quad Lock vibration dampener.
These are just my experiences though. As everyone has different bikes, different phones and different mounting setups, it makes sense to share our experiences here... especially regarding camera stabilisation modules getting damaged by vibrations.
So please, if you have experiences, add them here. Add pictures to show your setup, mention what mounts/accessories you have and how it's been doing so far (pros and cons).
Hi,
my Quad Lock equipment is on it's way from the Netherlands, via GLS.
I ordered:
Handle bar mount
Case for iPhone 12 pro
Dampener
Weatherproof Wireless Charging Head
Motorcycle Knuckle Adapter
Can't wait until it comes. 😉
Greets
Thomas
I'm using SP connect. Pretty much the same as Quadlock. So far very happy with it. It's very solid.
At the moment I'm using an old iPhone SE which is used only for navigation and I have no idea if the camera is damaged or not.
Since my Africa Twin has Apple CarPlay I plan to start using my main phone (iPhone 8) and ordered an antivibration module as well just to be sure. Previous bike on the photo...
Hi, Newbie here..... Looks like an awesome forum! I'm about to purchase the Quad Lock 1" Ball Adapter Motorcycle Kit (link below). I'll be using this for motorcycling & snowmobiling. I'd like to know if the Vibration Dampner (link below) will be able to attach to this kit due to having the RAM ball mount? If so, how would it mount? I'd sincerely appreciate your input if you have this setup. Thanks, Ray
Quad Lock 1" Ball Adapter Motorcycle Kit: https://www.quadlockcase.ca/collections/iphone-6-6s/products/1-ball-mount-motorcycle-kit-iphone?&device=iPhone%206/6s
Vibration Dampner: https://www.quadlockcase.ca/collections/accessories/products/vibration-dampener?variant=32819765379147
I'm about 99% sure it will. It will go in between the ball and the blue mount. Like so
Without the dampener, the blue mount screws into the ball. With the dampener the dampener will screw in the hole where the blue mount used to screw into... and the blue mount will screw onto the dampener.
If you want to be 100% sure...best to ask Quad Lock.
Thank you Guido..... Appreciate the quick response! That looks like it would work. I did as you suggested and contacted Quad Lock. I'll confirm here once I get an answer. Thanks again, Ray 👍😊
I'd like to add, I also emailed Quad Lock about their shipping status in the USA due to the following found on the USA site under Covid 19 next to the checkout basket;
USPS are currently experiencing scanning and shipping delays due to high demand. We are currently delivering to all other regions. Please use a residential address. Deliveries to business addresses may not be completed.
I asked them if the shipping issue has cleared up yet for me to place an order. 🤔
As for the Ram mount working with the Vibration Dampner, you were right..... Awesome! Still waiting on shipping answers.
Hi,
it's Christmas! My ordered parts arrived today. Only the knuckle adapter is not the part I ordered. It looks way different to the part you can see on the picture in the post above.
My delivered adapter contains one plastic part with two tiny screws and I don't know how to mount it between the base handlebar mount and the Quad Lock head...
This is what I expected.
I already sent Quad Lock a mail with pictures. For the beginning I can mount the parts I have and see how looks like.
Looks like they sent me a camera/light adapter.
